Area Control Panel

The floor alarm device (regional control panel) is used to monitor the pressure of one or more medical gas lines. Up to 6 analog gas pressure measurement sensors (transmitters) can be connected to the floor alarm device. The pressure levels of the gases connected to these sensors are displayed on the digital display numerically and at an adjustable conversion period.
The gas pressure level ranges to be monitored are set on the digital display and an audible and visual warning is given in case of exceeding these ranges. In addition, the warning presentation can be strengthened by connecting an external audible or visual stimulator to the relay output on the device. In addition to these, if the device is connected to a computer, the warning is displayed in the computer program and reporting can be made.

Simple, fast and efficient device operation thanks to 2×16 LCD display and user-friendly menus
Medical gas pressure measurement with 0.1Bar accuracy
6 different gas pressures can be monitored on a single screen
Lower and upper limit values of gas pressure levels can be changed
Any gas monitoring line can be deactivated and activated
The display time of the gas pressure value can be changed
The buzzer can be switched off and on in case of alarm
The temporary silencing time of the alarm warning tone can be changed
Gas pressure levels can be represented in units of BAR, mBAR, PSI, kPa, MPa, AT, ATM, mmHg, cmHg, TORR
Menu language can be switched between English and Turkish
Password usage can be activated so that device features can only be done by authorized persons.
The password to be used can be changed in the field.
When an external relay device is connected, the operating status of the relays (NO or NC) can be set
Network and Device address settings required for computer connection of the device can be made

CONTACT US